Getting started with your installation

Before installing your sensors, make sure that you have planned for the installation.

This guide provides information about how to conduct the installation of a set of Disruptive Technologies sensors and Cloud Connectors for operational use.  

The goal of the installation phase is to make sure that all the sensors report data in a robust matter so that all the required measurements are harvested.

No expert knowledge of sensors or radio equipment is required to achieve a high-quality installation of sensors from Disruptive Technologies.

The focus of the guide is to provide practical advice, rule of thumb guidelines and suggestions based on installation planning experience. 

What you will need to carry out an installation

DTAsset_61fig.png

Installation steps

With these steps completed answered, your installation is completed, and the data is ready to be turned into actionable insights.