Counting Touch Sensor



The Wireless Counting Touch Sensor detects when the sensor is touched. A touch will increment an internal counter, and the cloud server is updated with the count number at 15-minute intervals. Wireless messages are sent via SecureDataShot™ technology to the Cloud Connector (Gateway). The Cloud Connector relays the information onwards to the cloud server.

An immediate message is transmitted if the sensor is touched and held for approximately 4 seconds, allowing real-time sensor testing.

EU and US variants

This sensor is available in two variants, one for the EU and one for the US, due to different certifications, compliances, and wireless communication.


Operating conditions 
Temperature range -40 to 85 °C / -40 to 185 °F
Recommended temperature range -25 to 50 °C / -13 to 122 °F, non condensing
Humidity at 25 °C  / 77 °F 0 to 100% relative humidity
Wireless communication 
 EU 868 MHz SRD/ISM band, SecureDataShot
 US 915 MHz ISM band, SecureDataShot
Certifications and compliance 
EU CE, WEEE, Batteries directive
US Certified to FCC and ISED regulations
FCC ID: 2ATFX-100541
IC: 25087-100541
Recommended storage conditions Cool and dry, near normal room temperature
Construction Robust design, sealed, IP68 and UL 50E Type 4X 
Size and weight 19 x 19 x 2.5 mm, 2.0 g
Lifetime Up to 15 years in the default configuration and standard environment
Wireless range 25 m typical indoor, similar to a WiFi network with an advanced WiFi router. Up to 1000 m in line of sight.
Product numbers and datasheets
101675 Counting Touch Sensor EU 
(No longer available for purchase)
 Datasheet Wireless Counting Touch Sensor EU 101675
101729 Counting Touch Sensor US
(No longer available for purchase)
 Datasheet Wireless Counting Touch Sensor US 101729
102071 Counting Touch Sensor EU – QR code
 Datasheet Wireless Counting Touch Sensor EU QR 102071
102100 Counting Touch Sensor US – QR code
 Datasheet Wireless Counting Touch Sensor US QR 102100

See datasheet for detailed specifications.