Counting Tactile Touch Sensor

Sensor_-_Tactile.png

The Wireless Counting Tactile Touch Sensor detects when the sensor is pressed and gives audible and tactile feedback to the user. A press will increment an internal counter, and the cloud server is updated with the count number at 15-minute intervals. Wireless messages are sent via SecureDataShot technology to the Cloud Connector (Gateway). The Cloud Connector relays the information onwards to the cloud server.

An immediate message is transmitted if the sensor is pressed and held for approximately 4 seconds, allowing real-time sensor testing. 

EU and US variants

This sensor is available in two variants, one for the EU and one for the US, due to different certifications, compliances, and wireless communication.

Specifications

Operating conditions 
Temperature range -40 to 85 °C / -40 to 185 °F
Recommended temperature range -25 to 50 °C / -13 to 122 °F, non condensing
Humidity at 25 °C  / 77 °F 0 to 100% relative humidity
Wireless communication 
 EU 868 MHz SRD/ISM band, SecureDataShot
 US 915 MHz ISM band, SecureDataShot
Certifications and compliance 
EU CE, WEEE, Batteries directive
US Certified to FCC and ISED regulations
FCC ID: 2ATFX-100541
IC: 25087-100541
Other
Recommended storage conditions Cool and dry, near normal room temperature
Construction ABS
Size and weight 26 x 26 x 5.9 mm, 5.0 g
Lifetime Up to 15 years in the default configuration and standard environment
Wireless range 25 m typical indoor, similar to a WiFi network with an advanced WiFi router. Up to 1000 m in line of sight.
Product numbers and datasheets
101677 Counting Tactile Touch Sensor EU
 Datasheet Wireless Counting Tactile Touch Sensor EU 101677
101728 Counting Tactile Touch Sensor US
 Datasheet Wireless Counting Tactile Touch Sensor US 101728

See datasheet for detailed specifications.

Documents

Resources