The Wireless Counting Proximity Sensor can detect objects that are removed or placed in front of the sensor. An internal counter is incremented each time status is changed, and the cloud server is updated with the count number at 15-minute intervals. Wireless messages are being sent via SecureDataShot™ technology to the Cloud Connector (Gateway). The Cloud Connector relays the information onwards to the cloud server.
An immediate message is transmitted if the sensor is touched, allowing real-time testing of the sensor.
EU and US variants
This sensor is available in two variants, one for the EU (101712) and one for the US (101730) due to different requirements on certifications, compliances, and wireless communication.
|Temperature range||-40 to 85 °C / -40 to 185 °F|
|Recommended temperature range||3 to 50 °C / 37 to 122 °F, non condensing|
|Humidity at 25 °C / 77 °F||0 to 100% relative humidity|
|EU||868 MHz SRD/ISM band, SecureDataShot™|
|US||915 MHz ISM band, SecureDataShot™|
|Certifications and compliance|
|EU||CE, WEEE, Batteries directive|
|US||Certified to FCC and ISED regulations
FCC ID: 2ATFX-100541
|Recommended storage conditions||Cool and dry, near normal room temperature|
|Construction||Robust design, sealed, IP68 and UL 50E Type 4X|
|Size and weight||19 x 19 x 2.5 mm, 2.0 g|
|Lifetime||Up to 15 years in the default configuration and standard environment|
|Wireless range||25 m typical indoor, similar to a WiFi network with an advanced WiFi router. Up to 1000 m in line of sight.|
See datasheet for detailed specifications.