Water Detector Range Extender Textile Addon

PN 101881

Asset_43.png

 

The Water Detector Range Extender Textile Addon is used to increase the sensitivity of the Wireless Water Detector. The addon makes the Water Detector able to detect even small amounts of water in contact with the strip anywhere along its length.

  • Improves the sensitivity of the Water Detector
  • Contains adhesive for attachment to surfaces
  • Allows detection of water over a larger area compared with the Water Detector Range Extender

High humidity

Only use in non-condensing environments since it will react to high humidity.

Typical use

  • Environments where water is normally never present

Specifications

Operating conditions 
Temperature range -40 to 85 °C / -40 to 185 °F
Humidity at 25 °C  / 77 °F 0 to 90% relative humidity, non-condensing
Other
Recommended storage conditions Cool and dry, near normal room temperature
Materials ABS PA-757, 3M 9088-200
Size and weight 300 x 20 x 0.2 mm

See datasheet for detailed specifications.

Documents

 Datasheet Water Detector Range Extender Textile Addon 101881

Installation

Attach the Textile Addon to the Water Detector Range Extender after the sensor is placed inside the bracket as seen below.

mceclip1.png

Related resources