Installing Sensor Replacement Tape Roll

This guide shows how to install the Double-sided Sensor Replacement Tape Roll for the DT Wireless Sensors. Double-sided replacement tape makes the application of the Wireless Sensors quick and easy. It can be used in both indoor and outdoor applications.

 A PDF copy of the abbreviated installation manual in download format is available here.

  1. What you need
  2. Planning the installation
  3. Activation
  4. Mounting options

What you need

To ensure a robust installation, you should have the following components:

In addition to the items listed above, it is advisable to have the following on hand:

  • a laptop or a smartphone running the DT Studio web application If your company does not have a DT Studio organization, get started at
  • we also recommend having one or more online Cloud Connectors (gateways) close by to enable forwarding sensor data to the DT Cloud and to check the connectivity of the sensor once it is installed. Please refer to our guide for detailed instructions on how to properly install our Cloud Connectors.

Planning the installation

Before proceeding with the installation, it's essential to clarify your measurement objectives and evaluate range requirements. For more information, please visit Installation planning.


Claim the sensors in Studio by scanning the QR code found on the sensor packaging. If only a few sensors are needed, they can also be claimed individually in Studio. The sensor is now available in Studio and you can give it a name, a description, a label, etc. Ensure that you also configure both the Heartbeat Interval and the Sampling Rate for all the Temperature sensors in Studio.

Mounting options

To guarantee a correct installation, adhere to the following steps:

  1. Clean the surface to ensure good sensor adhesion.
  2. Peel the protective film from the back of the tape.
  3. Place the tape on the back of the sensor.
  4. Attach the sensor to the surface and press gently.