The Wireless Water Detector detects water coming in contact with the front of the sensor. When water is detected the sensor immediately sends an event to the cloud service through a Cloud Connector (Gateway) via SecureDataShot™ technology. The sensor will also send a signal if the water is no longer covering the sensor.
An optional ribbon can be attached to the sensor to detect water in a larger area.
The Wireless Water Detector transmits a message to the system every 15 minutes to notify it is present and operational.
The Wireless Water Detector has touch functionality for simple installation and use.
EU and US variants
This sensor is available in two variants, one for the EU (101714) and one for the US (101806) due to different requirements on certifications, compliances, and wireless communication.
|Temperature range||-40 to 85 °C / -40 to 185 °F|
|Recommended temperature range||0 to 50 °C / 32 to 122 °F, non condensing|
|Humidity at 25 °C / 77 °F||0 to 100% relative humidity|
|EU||868 MHz SRD/ISM band, SecureDataShot™|
|US||915 MHz ISM band, SecureDataShot™|
|Certifications and compliance|
|EU||CE, WEEE, Batteries directive|
|US||Certified to FCC and ISED regulations
FCC ID: 2ATFX-100541
|Recommended storage conditions||Cool and dry, near normal room temperature|
|Construction||Robust design, sealed, IP68 and UL 50E Type 4X|
|Size and weight||19 x 19 x 2.5 mm, 2.0 g|
|Lifetime||Up to 15 years in the default configuration and standard environment|
|Wireless range||25 m typical indoor, similar to a WiFi network with an advanced WiFi router. Up to 1000 m in line of sight.|
See datasheet for detailed specifications.