Water Sensor

Water.jpg

The Wireless Water Detector detects water coming in contact with the front of the sensor. An optional ribbon can be attached to the sensor to detect water in a larger area. When water is detected, the sensor wirelessly transmits the result to nearby Cloud Connectors (gateways) at a predetermined Heartbeat Interval (HBI) via the SecureDataShot™ protocol. Cloud Connectors relay sensor data to the cloud via cellular or ethernet connectivity. From the cloud, the data can be integrated into other services using REST APIs and webhooks or viewed directly in DT Studio.

The Wireless Temperature Sensor uses HBI to transmit a message notifying the system that it is present and operational, which can be set to 15 min, 30 min, 45 min, or 60 min. 

This sensor comes in two versions: EU (Product No. 102078) and US (Product No. 102084), each tailored to meet distinct regional certifications, compliances, and wireless communication requirements.

Datasheets

  Datasheet Wireless Water Sensor EU/US

  Datasheet Wireless Water Detector EU 101714 (No longer available for purchase)

  Datasheet Wireless Water Detector US 101806 (No longer available for purchase)

Specifications

Operating conditions 
Temperature -40 to 85 °C / -40 to 185 °F
Humidity 0 to 100% RH (non-condensing)
Wireless communication 
 EU / US 868 MHz ISM band / 915 MHz ISM band, SecureDataShot
Range
Indoor / with Range Extender up to 40 m | 131 ft / up to 150 m | 492 ft
Battery
Battery type Lithium
Replaceable battery No
Lifetime Up to 15 years in the default configuration and standard environment
Other
Size and weight 19 x 19 x 3.5 mm, 3.0 g / 0.75 x 0.75 x 0.14 in, 0.11 oz
Construction Impact-modified acrylic film, IP68
Data Backfill No

Documents

Installation

Resources