Wireless Water Detector

PN: 101714/101806

Sensor_-_Water.png

The Wireless Water Detector detects water coming in contact with the front of the sensor. When water is detected the sensor immediately sends an event to the cloud service through a Cloud Connector (Gateway) via SecureDataShot™ technology. The sensor will also send a signal if the water is no longer covering the sensor.

An optional ribbon can be attached to the sensor to detect water in a larger area.

The Wireless Water Detector transmits a message to the system every 15 minutes to notify it is present and operational. 

The Wireless Water Detector has touch functionality for simple installation and use.

EU and US variants

This sensor is available in two variants, one for the EU (101714) and one for the US (101806) due to different requirements on certifications, compliances, and wireless communication.

Specifications

Operating conditions 
Temperature range -40 to 85 °C / -40 to 185 °F
Recommended temperature range 0 to 50 °C / 32 to 122 °F, non condensing
Humidity at 25 °C  / 77 °F 0 to 100% relative humidity
Wireless communication 
 EU 868 MHz SRD/ISM band, SecureDataShot
 US 915 MHz ISM band, SecureDataShot
Certifications and compliance 
EU CE, WEEE, Batteries directive
US Certified to FCC and ISED regulations
FCC ID: 2ATFX-100541
IC: 25087-100541
Other
Recommended storage conditions Cool and dry, near normal room temperature
Construction Robust design, sealed, IP68 and UL 50E Type 4X 
Size and weight 19 x 19 x 2.5 mm, 2.0 g
Lifetime Up to 15 years in the default configuration and standard environment
Wireless range 25 m typical indoor, similar to a WiFi network with an advanced WiFi router. Up to 1000 m in line of sight.

See datasheet for detailed specifications.

Documents

 Datasheet Wireless Water Detector EU 101714
 Datasheet Wireless Water Detector US 101806
 Safety and Use Leaflet
 Declaration of Conformity

Related resources

Photos

MIP_ALE_3199.MXF.13_34_58_02.Still001_1.5x.jpg