PN 100590
The Cloud Connector EU (Ethernet only) uses an ethernet connection to relay data from wireless sensors that communicate using the SecureDataShot protocol to the DT Cloud infrastructure. Data from the cloud can be viewed directly in DT Studio or integrated into other services using REST APIs and webhooks.
Datasheets
Datasheet Cloud Connector US 100590
Specifications
| Operating conditions | |
| Temperature | 0 to 45 °C | 32 - 113°F |
| Humidity | 10 to 90% RH (non-condensing) |
| Wireless communication | |
| EU / US | 915 MHz ISM band, SecureDataShot™ |
| Range | |
| Indoor | See sensor specifications for more details. |
| Power | |
| Power supply | Power-over-Ethernet (PoE) - 36-57 V - IEEE802.3at Type 1 |
| Power Consumption | Average < 5 W (2.2 W typical) |
| Power over Ethernet (PoE) | Available |
| Cellular communication | |
| Transmit Power | < 320 mW |
| Other | |
| Size and weight | 130 x 65 x 40 mm, 200 g | 5.12 x 2.56 x 1.58 inches, 7 oz |
| Construction | Polycarbonate (PC), IP20 |
| Data Backfill | No |