Cloud Connector US (Ethernet only)

PN 100590


The Cloud Connector US connects the whole range of SecureDataShot™ enabled Sensors to the Cloud through a Power-over-Ethernet connection.

There is no need for configuration during installation. The Cloud Connector will transparently relay traffic between all Sensors in range and the Cloud without the need for any user configuration or intervention.



Operating Conditions
Temperature 0 to 45 °C / 32 to 113 °F
Humidity 10 to 90% relative humidity, non-condensing
Ingress protection IP20
Dimensions 130 x 65 x 40 mm
Weight 200 g
Power supply Power-over-Ethernet (PoE) - 36-57 V - IEEE802.3at Type 1
Power consumption Average < 5 W (3 W typical), peak < 19 W (< 5 ms)
Certification and compliance
FCC ID: 2ATFX-100590
IC: 25087-100590
IEC 62368-1
Interfaces 100Base-T - RJ-45

See datasheet for detailed specifications.


 Datasheet Cloud Connector US 100590
 Safety and Use Leaflet