PN 100011
The Cloud Connector EU uses a cellular or ethernet connection to relay data from wireless sensors that communicate using the SecureDataShot protocol to the DT Cloud infrastructure. Data from the cloud can be viewed directly in DT Studio or integrated into other services using REST APIs and webhooks.
The phase-out of 2G and 3G is already in progress in numerous countries. For more information on timelines, please visit the following article. As a result, EU 2G/3G devices are anticipated to lose compatibility with cellular networks soon.
Datasheets
Datasheet Cloud Connector EU 100011
Specifications
| Operating conditions | |
| Temperature | 0 to 45 °C | 32 - 113°F |
| Humidity | 10 to 90% RH (non-condensing) |
| Wireless communication | |
| EU / US | 868 MHz ISM band, SecureDataShot™ |
| Range | |
| Indoor | See sensor specifications for more details. |
| Power | |
| Power supply | 230 V AC, 75 mA, 50 Hz. Power plug: Europlug type C |
| Power Consumption | / |
| Power over Ethernet (PoE) | / |
| Cellular communication | |
| Transmit Power | / |
| Other | |
| Size and weight | 130 x 67 x 77 mm, 200 g | 5.12 x 2.64 x 3.03 inches, 7 oz |
| Construction | Polycarbonate (PC), IP20 |
| Data Backfill | No |